PSA Label History

From Card Conservation Wiki
🔓 Free Resource — No Login Required
A label-by-label history of the PSA slab, for dating a holder and legit checking it. See all free guides at Free Resources.

PSA Label History and Legit Check

PSA has changed the paper label inside its holders (the "flip") twelve times between 1991 and 2021. Each change left tells: a font, a hologram, a barcode, a line of text on the back. Knowing them lets you do two things with a slab in your hand:

  • Date it. The label style narrows down when the card was graded or last reholdered.
  • Legit check it. A fake or tampered slab often mixes features that never existed together, such as a half-point grade on a 1990s label.

This page is built on History of the PSA Label by Nic Schmitt (REV01, April 11, 2021), a 17-page reference compiled from PSA press releases and collector forum research. The full guide, with every photo, is hosted here as a free download.

📄 History of the PSA Label (PDF)
By Nic Schmitt. 17 pages, 12 label styles, front and back photos, full references. 3 MB.
🔎 PSA Cert Verification
The label is evidence. The cert lookup is the check. Always run the number before you pay.
WARNING: A correct label does not prove a slab is genuine, and an old label does not prove it is fake. Counterfeiters copy labels, and scammers reseal real holders around altered labels. Use this page to spot things that do not add up, then confirm with PSA's cert verification.

Quick Dating Table

Dates with a question mark are unknown in the source guide. PSA did not announce the early changes, so those ranges come from collector observation.

Style In use Front tells Back tells
1 1991 to 1992 Slashed zeros. Long barcode. "PSA" hologram bonded to the outside of the holder
2 1992 to 1999 No slashed zeros. Shorter, centered barcode. "PSA" hologram, now bonded on the inside
3 2000 to 200? Same as style 2 Hologram reads "COLLECTORS UNIVERSE THE COLLECTOR'S COMPANY"
4 200? to 200? Barcode and grade aligned left. Wider, rounder letters. Same as style 3
5 200? to 200? (rare) Grade back on the right. White field has square corners. No hologram. Light blue. "A COLLECTOR'S UNIVERSE COMPANY"
6 200? to Jan 31, 2008 Same as style 5 Dark blue. "A DIVISION OF COLLECTOR'S UNIVERSE NASDAQ CLCT"
7 Feb 1, 2008 to 20?? Half-point grades begin. Grade number sits below the grade description. Same as style 6
8 20?? to Apr 16, 2015 Same as style 7 Sharper lettering on darker, thicker blue stock
9 Apr 17 to Dec 1, 2015 Hologram embedded in the label, centered under the PSA name Same as style 8
10 Dec 2, 2015 to Jun 13, 2017 Same as style 9 Cert number and a second barcode added
11 Jun 14, 2017 to Feb 21, 2021 Wave-pattern fugitive ink. Lighthouse hologram hiding "NASDAQ: CLCT". Large Lighthouse PSA logo, QR code, fugitive ink
12 Feb 22, 2021 onward Lighthouse hologram now hides "PSA" Same change on the back logo
Tip: The source guide was last revised in April 2021 and does not cover PSA/DNA autograph labels. For slabs graded after that, lean on the cert lookup rather than the label style.

Legit Check

Work through these in order. The first three catch most problems.

1. Run the cert number

Look the certification number up at psacard.com/cert. The card, year, set, card number and grade on PSA's record must match the label exactly. This is how buyers caught the Anthony Curcio fake-label scheme: low-grade slabs with the grade whited out and "GEM MT 10" printed over it.

  • Be suspicious of any listing photo with the cert number covered or cropped.
  • A cert that has been deactivated, or that returns a different card, ends the conversation.
  • On style 10 and later, scan the barcode on the back. It should read the same cert number as the front.
  • On style 11 and later, the QR code on the back should lead to PSA's own cert page for that number.

2. Check that the label's features belong together

Compare the slab against the table above. Features from different eras on one label are a red flag.

  • Half-point grades (8.5, 7.5 and so on) did not exist before February 1, 2008. A half grade on a style 1 through 5 label is wrong.
  • A front hologram should not appear with a back that has no cert number and barcode, except in the short style 9 window (April to December 2015).
  • A Lighthouse label showing "NASDAQ: CLCT" belongs to June 2017 through February 2021. One showing "PSA" belongs after that.
  • The hologram wording on the back should fit the era: "PSA", then "COLLECTORS UNIVERSE", then no hologram at all from style 5.
Tip: A new label on an old cert number is normal. PSA reholders cards on request, and a reholdered card gets the current label while keeping its original cert number. The reverse, a very recent cert number on a 1990s-style label, is what you should question.

3. Inspect the Lighthouse hologram (2017 onward)

Tilt the slab left to right. On a genuine label the PSA logo switches "on" and "off", hiding and revealing the text in the background pattern: "NASDAQ: CLCT" on style 11, "PSA" on style 12. A printed copy stays static. The wave-like fugitive ink behind the text is designed to show tampering.

4. Look at the print

Tells reported on counterfeit PSA labels, from grader interviews and the Cardboard Alchemists Podcast:

  • A differently shaped "G" in GEM MT
  • Thicker font than a genuine label
  • A squashed barcode
  • The PSA logo on a genuine label is slightly raised

Put a known genuine slab of the same era next to the one you are checking. Differences in font weight and spacing are much easier to see side by side.

5. Use a black light

Genuine Lighthouse-era labels carry marks that only show under ultraviolet light. A cheap 365 nm UV flashlight is enough. Check in a dark room.

  • Front: a row of repeating PSA logos glows yellow across the top of the label.
  • Back: small PSA logos appear in the blue field around the large PSA wordmark.

A label that shows nothing under UV, or glows evenly like ordinary printer paper, needs a closer look. Older label styles predate these features, so use this check on Lighthouse labels (style 11 and 12).

6. Check the holder, not just the label

A real label can sit in a holder that has been cracked and resealed.

  • Look along all four edges for frosting, the cloudy stress marks left when a case is pried open and glued back.
  • Take off any graded-card guard or sleeve that hides the edges before you judge.
  • Holder details changed with the labels: the small raised PSA logo appears on the front lower right from style 2, and on the back lower right as well from style 3.
  • Use a 10x loupe on the label printing and the seam.

7. Verify the card inside

A genuine slab can hold a counterfeit or swapped card. See Counterfeit Detection and Fake vs Real Guide for rosette pattern, core color and stock checks, and Altered Flags for signs of trimming and recoloring.

Caution: If a seller will not show the cert number, the back of the slab, or the edges, do not buy.

The Twelve Label Styles

Photos are from History of the PSA Label by Nic Schmitt. Style numbers follow that guide.

Style 1: 1991 to 1992

Front: Slashes through the zeros and a long barcode.

Back: A hologram with "PSA" inside it, bonded to the outside of the plastic in the same way as the white PSA logo. The T206 Honus Wagner shown is PSA's first certified card. Its hologram appears to be an outside sticker and looks as if it is peeling.

Variation: The white field's corners are less rounded on the Wagner label than on the 1950 Bowman below. These may be two early variations, or the Wagner may have been reholdered.

Style 2: 1992 to 1999

Front: The slashed zeros are gone. The barcode is shorter and centered. The PSA name is no longer bold, and the white corners have a tighter radius.

Back: Still a "PSA" hologram, but now bonded on the inside. The white PSA logo is still on the outside.

Holder: PSA began putting its logo on the bottom right of the front of the holder.

Style 3: 2000 to 200?

Front: No change from style 2. Some labels have an un-bolded PSA font.

Back: The hologram changes from "PSA" to "COLLECTORS UNIVERSE THE COLLECTOR'S COMPANY".

Holder: The small raised PSA symbol on the front lower right is joined by the same symbol on the back lower right. Some holders also carry an inner number at the lower left, front and back. It reads reversed and cannot be felt from the outside.

Style 4: 200? to 200?

Front: The barcode is aligned left. Numbers are shorter and letters are wider and rounder. The grade sits to the left instead of the right.

Back: No change from style 3.

Style 5: 200? to 200? (rare)

This label is rarely seen.

Front: Similar to styles 2 and 3. The font returns to the earlier style and the grade is aligned right again. The white field inside the red border now has square corners.

Back: The hologram is gone, replaced by the text "A COLLECTOR'S UNIVERSE COMPANY". The field is a light blue unlike any other style. The PSA logo is now silver and bonded to the inside of the plastic.

Style 6: 200? to January 31, 2008

Front: Identical to style 5.

Back: A much darker blue. The text changes to "A DIVISION OF COLLECTOR'S UNIVERSE NASDAQ CLCT". All text is now printed on the label, not on the holder.

A very small number of half grades were issued on this label before the layout changed, written in line with the grade description (for example "NM-MT+ 8.5").

Style 7: February 1, 2008 to 20?? (half points)

PSA introduced half-point grades on February 1, 2008.

Front: The grade number moves to its own line, directly below the grade description on the right. During the launch, some labels were issued with the number still in line with the description.

Back: No change.

Style 8: 20?? to April 16, 2015

Front: Same as style 7.

Back: The lettering is more defined, on darker blue stock that seems thicker than style 7.

Style 9: April 17 to December 1, 2015 (front hologram)

PSA added a security hologram that is part of the label paper itself, the same approach used on PSA/DNA certificates.

Front: The hologram sits at the base of the label, centered under the PSA name.

Back: Same as style 8.

Style 10: December 2, 2015 to June 13, 2017 (back barcode)

Front: Same as style 9.

Back: The cert number is now printed on the back, with a matching barcode. Scanning it returns the same certification number as the front.

Style 11: June 14, 2017 to February 21, 2021 (Lighthouse, NASDAQ: CLCT)

The largest redesign.

Front: Still a red border, but the plain white background is replaced by wave-like brush strokes of fugitive ink. The hologram is upgraded to Lighthouse technology, which switches on and off as the label is tilted left to right. The PSA logo hides or reveals the Collectors Universe stock ticker, "NASDAQ: CLCT", in the background pattern.

Back: Still PSA blue. A large centered Lighthouse PSA logo, a stylized "PSA" in place of "Professional Sports Authenticator", and a QR code. Tamper-evident fugitive ink runs below the blue.

Style 12: February 22, 2021 onward (Lighthouse, PSA)

Same as style 11, except the Lighthouse logo on the front and back now shows "PSA" in the background pattern instead of "NASDAQ: CLCT".

The change follows the sale of Collectors Universe, completed on February 22, 2021, to an investor group led by Nat Turner, D1 Capital Partners and Cohen Private Ventures. The company's stock stopped trading on NASDAQ, so the ticker came off the label.

Limits of This Guide

  • It ends in April 2021. Label and holder changes after that are not covered.
  • It does not cover PSA/DNA labels.
  • Several early date ranges are unknown and marked with a question mark.
  • The style 8 front photo in the source is reused from style 7, and its back photo is from a different slab.

If you can fill in a date or have a clear photo of a variation, see How to Contribute.

Credit and Sources

History of the PSA Label was developed by Nic Schmitt (REV01, April 11, 2021). It is hosted here unmodified: download the PDF.

The guide's own references:

Further reading

See Also


Affiliate Disclosure: This page contains affiliate links. We may receive a small commission on purchases at no additional cost to you. This helps fund the wiki.